NANJING LESUN SCREW CO.,LTD

Specifications and Characteristics of Extruder Screw Barrel

The extruder screw barrel is the molding processing method with the most varieties, the most changes, the high productivity, the strong adaptability, wide range of uses and the largest proportion of output in the field of polymer processing.


Ⅰ. Specifications of extruder screw barrel


1. Diameter: Ф16-Ф300.


2. Aspect ratio: L/D=15-40.


3. Common material: 38crMoAIA. Quenching and tempering, qualitative and nitriding treatment. Surface hardness: HV≥900. Depth of nitride layer: 0.5-0.8mm.


4. Common materials: WC/CO overall spray welding on the surface can effectively improve the service life of the extruder screw.


Ⅱ. Structural characteristics of extruder screw barrel


1. The structure of the extruder screw barrel is simple and the price is low.


2. It is suitable for plasticizing extrusion of polymers and extrusion processing of pellets. It has little shear degradation of the polymer, but the material stays in the extruder for a long time.


3. The extruder screw barrel is easy to operate and the process control is simple.


4. It has good mixing and plasticizing ability, and the material stays in the extruder for a short time, which is suitable for powder processing.


5. The output of the extruder screw barrel is large. The extrusion speed is fast and the output energy consumption is low.


Ⅲ. The structure of the extruder screw is suitable for


PVC wire and cable extrusion, PVC gusset extrusion, PVC profile extrusion, PVC pipe extrusion (containing calcium powder), PVC sheet extrusion, PVC sheet extrusion, PVC granulation extrusion, PVC blown film extrusion, etc.


For PVC blown film extrusion: One is direct extrusion blow molding with powder. The extruder screw used in this method has a large aspect ratio. The screw metering section is long, the groove depth is shallow and the compression ratio is large. In addition, the feeding section is equipped with forced water cooling and the screw has a strong ability to extract materials, so that the plasticization is good and there is a certain head pressure to meet the needs of film blowing. One is an ordinary extrusion film blowing unit, which uses pellets to blow film, but adds a pelletizing process.


Extruder screw, different types of screws are selected for different products. It has high output and good plasticization.


Our conveying screw element is a self-sweeping extruder screw assembly, which opens longitudinally and closes laterally, and has a strong conveying effect. It has short material residence time, good self-cleaning and can build up high pressure in a short axial distance.


The conveying element is mainly of threaded construction. Its function is to transport the material and give the material a certain thrust, so that the material can overcome the resistance encountered in the flow channel. The extruder screw elements are the most popular extruder screw element at present. It has strong conveying function, short residence time and good self-cleaning.


In terms of production specifications, LESUN not only provides general extruder screws and standard twin screw extruder accessories produced by manufacturers, but also provides design and manufacturing services for special extruder accessories according to customer requirements. At the same time, we also provide surveying and mapping business and processing business of accessories for major extrusion press companies. If you are in need, welcome to contact us.

  • Selection of Extruder Screw Material

    Selection of Extruder Screw Material

    January 15, 20211. Extruder screwThe extruder screw is the key component of the extruder. The performance of the screw determines the productivity, plasticizing quality, dispersion of additives, melt temperature and ...view
  • Extruder Screw and Barrel Cleaning and Process

    Extruder Screw and Barrel Cleaning and Process

    December 10, 2020I. The way to clean the extruder screw correctlyThe efficient active cleaning materials can be used for double screw extruder screw cleaning and the cleaning process has the following steps:1. Adding...view
  • The Reasons for the Unstable Extruder Screw Speed

    The Reasons for the Unstable Extruder Screw Speed

    August 25, 2021Ⅰ. Common causes of unstable working speed of extruder screw1. The driving V-belt is severely worn, causing slipping during work.2. The center distance of the V-belt drive pulley is too small, so tha...view
  • Maintenance and Repair of Extruder Screws and Barrels

    Maintenance and Repair of Extruder Screws and Barrels

    June 8, 2021Screw and barrel are two important parts of plastic mechanical extruder. If the screw and barrel of the plastic machinery extruder are damaged, it will affect the operation of the machine.1. What shou...view
top Inquiry