-
Causes of Wear in Extruder Screw Elements
25
Jun
2024
Extrusion is crucial in manufacturing, where screws and barrels play pivotal roles. However, wear and tear in extruder screw elements can significantly impact efficiency and lifespan. Let's explore th...
-
Proper Cleaning Methods for Twin Screw Extruder Parts
15
Jun
2024
Effective cleaning of twin screw extruder parts, including the twin screw element, twin screw barrel, and twin screw shaft, is crucial for maintaining optimal performance. The process involves careful...
-
Enhancing Extrusion Efficiency with SK Screw Elements
30
May
2024
In the realm of extrusion technology, the SK screw element stands out as a pivotal component, particularly in the blanking and side feeding sections of the process. Renowned for its ability to augment...
-
An article to fully understand Splined Shafts
23
May
2024
Table of ContentsI. Introduction to Splined ShaftsII. Functions of Splined ShaftsIII. Applications of Splined ShaftsIV. Construction of Splined ShaftsV. Materials for Splined ShaftsVI. Using Splined S...
-
How to Disassemble the Extruder Screw? How to Repair It?
29
May
2022
Ⅰ. Reasons for damage to the extruder screw1. The temperature of raw materials is low when plasticizing.2. The raw material is mixed with metal foreign matter or there are many impurities in the raw ...
-
Extruder Screw and Barrel Technology
26
May
2022
The basic working principle of the extruder screw and barrel is to melt and compact the polymer, push it to the mold at constant pressure, constant temperature and constant speed, and form a parison i...
-
Analysis of Manufacturing Quality Requirements and Wear Solutions of Extruder Screw
23
May
2022
Ⅰ. What are the requirements for the manufacturing quality of the extruder screw?1. The screw used for the extruder should be made of alloy steel with small thermal deformation, wear resistance and c...
-
Factors Affecting the Service Life of Extruder Screw and Barrel and Processing Requirements
20
May
2022
Ⅰ. Factors affecting the service life of the extruder barrel and screw1. Working conditions of extruder barrel and screwWhen working in a relatively harsh environment, the temperature is generally ab...
-
Conditions and Methods of Using Barrel Screw
17
May
2022
Extruder barrel heating is widely used resistance heating, and thermocouples are used to achieve segmented temperature control and side detection. Resistance heating is the use of resistance to genera...
-
Effective Ways to Prevent Screw Slippage
14
May
2022
Many customers have encountered many questions when using twin-screw extruders, such as why the products produced by twin-screw extruders are defective, and what to do with their screw slipping. If th...
-
What Are the Technical Requirements for Barrel and Screw Manufacturing Quality?
11
May
2022
Ⅰ. Quality and technical requirements of extruder barrel1. The barrel of the extruder should be made of anti-corrosion and wear-resistant alloy steel. China is currently mostly made of 38CrMoAL, 40Cr...
-
The Cooling Purpose and Characteristics of the Extruder Barrel
05
May
2022
Extruder barrels are used in large twin screw extruders. The purpose of adopting this type of segmented combined extruder barrel is to facilitate the machining of the extruder barrel and save some mor...
-
What Are the Commonly Used Screws?
02
May
2022
Usually screw elements can be divided into ordinary type, gradual type, mutation type, mixing type, separation type, split type and various barrier type, pin type, DIS split type and exhaust type, etc...
-
What Should Be Used to Measure the Pros and Cons of the Extruder Screw?
28
Apr
2022
The screw and barrel are the most critical and soul parts of the injection molding machine, which are often called the heart of the extruder. It is in this part that the plastic (rubber) changes from ...
-
The Role of Heat Insulation of Extruder Barrel Screw
25
Apr
2022
The screw and the barrel are the same as the screw in the extrusion compression molding system. They are all important parts of the extruder. When the extruder barrel screw is working, it needs to be ...
